[TOC]

成都创新互联是一家朝气蓬勃的网站建设公司。公司专注于为企业提供信息化建设解决方案。从事网站开发,网站制作,网站设计,网站模板,微信公众号开发,软件开发,微信平台小程序开发,十余年建站对成都建筑动画等多个行业,拥有丰富的营销推广经验。
0 说明
使用的es版本为5.6,Linux版本为CentOs 6.5.
1 Elasticsearch bootstrap checks
1.1 开发环境
如果在es的配置中没有配置network.host来指定一个可用的IP地址的话,默认情况下,就绑定到localhost上,此时es会认为用户只是在开发环境下使用es,基于开箱即用的原则,虽然es此时也会进行bootstrap checks,来检查用户的配置是否与es设定的安全值相匹配,如下:
- 如果匹配,则不会有warnning信息,此时es正常启动;
- 如果不匹配,则会有warnning信息,但因为是开发环境,es依然会正常启动;
1.2 生产环境
一旦用户配置了network.host来指定一个可用的非loopback地址,那么es就会认为用户此时是在生产环境下启动es,同样会进行检查,但一旦检查不通过,直接会将前面的warnning提升为error,所以此时es会启动失败。
2 开发环境启动时的bootstrap checks分析
不配置network.host时,直接启动es,会有下面的warnning:
[2018-12-07T04:15:44,735][INFO ][o.e.d.DiscoveryModule    ] [PQ85ukj] using discovery type [zen]
[2018-12-07T04:15:45,702][INFO ][o.e.n.Node               ] initialized
[2018-12-07T04:15:45,703][INFO ][o.e.n.Node               ] [PQ85ukj] starting ...
[2018-12-07T04:15:46,071][INFO ][o.e.t.TransportService   ] [PQ85ukj] publish_address {127.0.0.1:9300}, bound_addresses {[::1]:9300}, {127.0.0.1:9300}
[2018-12-07T04:15:46,090][WARN ][o.e.b.BootstrapChecks    ] [PQ85ukj] max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
[2018-12-07T04:15:46,090][WARN ][o.e.b.BootstrapChecks    ] [PQ85ukj] max number of threads [1024] for user [hadoop] is too low, increase to at least [2048]
[2018-12-07T04:15:46,090][WARN ][o.e.b.BootstrapChecks    ] [PQ85ukj] max virtual memory areas vm.max_map_count [65530] is too low, increase to at least [262144]
[2018-12-07T04:15:46,090][WARN ][o.e.b.BootstrapChecks    ] [PQ85ukj] system call filters failed to install; check the logs and fix your configuration or disable system call filters at your own risk
[2018-12-07T04:15:49,269][INFO ][o.e.c.s.ClusterService   ] [PQ85ukj] new_master {PQ85ukj}{PQ85ukjdSoeVEpSpByAjMw}{Dbb3lzTWTN-eUEKXO8z-sw}{127.0.0.1}{127.0.0.1:9300}, reason: zen-disco-elected-as-master ([0] nodes joined)
[2018-12-07T04:15:49,313][INFO ][o.e.h.n.Netty4HttpServerTransport] [PQ85ukj] publish_address {127.0.0.1:9200}, bound_addresses {[::1]:9200}, {127.0.0.1:9200}
[2018-12-07T04:15:49,313][INFO ][o.e.n.Node               ] [PQ85ukj] started
[2018-12-07T04:15:49,553][INFO ][o.e.g.GatewayService     ] [PQ85ukj] recovered [0] indices into cluster_state提取其waarnning信息,如下:
文件描述符:
max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
线程数:
 max number of threads [1024] for user [hadoop] is too low, increase to at least [2048]
 虚拟内存:
 max virtual memory areas vm.max_map_count [65530] is too low, increase to at least [262144]
 system call filters:
 system call filters failed to install; check the logs and fix your configuration or disable system call filters at your own risk可以看到有4个问题,分别为:文件描述符、线程数、虚拟内存与system call filters。
虽然有warnning,但因为es本身会认为是在开发环境下运行,基于开箱即用的特性,是仍然可以正常启动的。
3 生产环境启动时的bootstrap checks分析
绑定IP地址后再启动,发现有下面的报错信息:
ERROR: [4] bootstrap checks failed
[1]: max file descriptors [4096] for elasticsearch process is too low, increase to at least [65536]
[2]: max number of threads [1024] for user [hadoop] is too low, increase to at least [2048]
[3]: max virtual memory areas vm.max_map_count [65530] is too low, increase to at least [262144]
[4]: system call filters failed to install; check the logs and fix your configuration or disable system call filters at your own risk直接error,所以会启动失败,除非进行上面的设置符合安全要求。
4 生产环境正常启动配置
解决上面出现的问题,需要进行如下的配置。
4.1 文件描述符
- 临时修改:
 ulimit -n 65536但是重新登录后就会恢复成默认值了。
- 永久修改
修改/etc/security/limits.conf配置,如下:
hadoop          soft    nofile  65536   # soft表示为超过这个值就会有warnning
hadoop          hadr    nofile  100000  # hard则表示不能超过这个值之后再重新登录,使用ulimit -n就可以进行验证。
4.2 线程数
修改/etc/security/limits.conf配置,如下:
hadoop          soft    nproc   2048
hadoop          hard    nproc   4096实际上,该配置文件对于nproc的说明为进程数,而不是线程数:
#        -          
                                                                                                   39,1          41%
# /etc/security/limits.conf
#
#Each line describes a limit for a user in the form:
#
#          -   
#
#Where:
# can be:
#        - an user name
#        - a group name, with @group syntax
#        - the wildcard *, for default entry
#        - the wildcard %, can be also used with %group syntax,
#                 for maxlogin limit
#
# can have the two values:
#        - "soft" for enforcing the soft limits
#        - "hard" for enforcing hard limits
#
#-  can be one of the following:
#        - core - limits the core file size (KB)
#        - data - max data size (KB)
#        - fsize - maximum filesize (KB)
#        - memlock - max locked-in-memory address space (KB)
#        - nofile - max number of open files
#        - rss - max resident set size (KB)
#        - stack - max stack size (KB)
#        - cpu - max CPU time (MIN)
#        - nproc - max number of processes
#        - as - address space limit (KB)
#        - maxlogins - max number of logins for this user
#        - maxsyslogins - max number of logins on the system
#        - priority - the priority to run user process with
#        - locks - max number of file locks the user can hold
#        - sigpending - max number of pending signals
#        - msgqueue - max memory used by POSIX message queues (bytes)
#        - nice - max nice priority allowed to raise to values: [-20, 19]
#        - rtprio - max realtime priority
#
#        -          
#
#*               soft    core            0
#*               hard    rss             10000 
 
 
 
 
 
 
 
 
  4.3 虚拟内存
- 查看当前值
sysctl vm.max_map_count- 临时设置
sysctl -w vm.max_map_count=262144但是重启系统后就会失效。
- 永久性设置
修改配置文件/etc/sysctl.conf,如下:
vm.max_map_count=262144需要重启后才生效。
4.4 system call filters
- 原因 
 这是在因为Centos6不支持SecComp,而ES5.4.0默认bootstrap.system_call_filter为true进行检测,所以导致检测失败,失败后直接导致ES不能启动。
- 解决
 在elasticsearch.yml中配置bootstrap.system_call_filter为false,注意要在Memory下面:
 bootstrap.memory_lock: false
 bootstrap.system_call_filter: false
参考:https://www.jianshu.com/p/89f8099a6d09
网页题目:Elasticsearch启动分析与问题解决-bootstrapchecks
文章地址:http://www.scyingshan.cn/article/iidcjp.html

 建站
建站
 咨询
咨询 售后
售后
 建站咨询
建站咨询 
 