建站
咨询
售后
建站咨询
这篇文章主要介绍了greenplum监控软件Greenplum-cc-web如何安装，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让小编带着大家一起了解一下
3 开始安装
以下是我的设置，可以根据自己的实际情况设置：
[gpadmin@mdw ~]$ gpcmdr --setup
An instance name is used by the Greenplum Command Center as
a way to uniquely identify a Greenplum Database that has the monitoring
components installed and configured. This name is also used to control
specific instances of the Greenplum Command Center web UI. Instance names
can contain letters, digits and underscores and are not case sensitive.
Please enter a new instance name:
> gpmon
The web component of the Greenplum Command Center can connect to a
monitor database on a remote Greenplum Database.
Is the master host for the Greenplum Database remote? Yy|Nn (default=N):
> n
The display name is shown in the web interface and does not need to be
a hostname.
What would you like to use for the display name for this instance:
> linux1024
What port does the Greenplum Database use? (default=5432):
>
Creating instance schema in GPDB. Please wait ...
The display name is shown in the web interface and does not need to be
a hostname.
Would you like to install workload manager? Yy|Nn (default=N):
> n
Skipping installation of workload manager.
The Greenplum Command Center runs a small web server for the UI and web API.
This web server by default runs on port 28080, but you may specify any available port.
What port would you like the web server to use for this instance? (default=28080):
>
Users logging in to the Command Center must provide database user
credentials. In order to protect user names and passwords, it is recommended
that SSL be enabled.
Do you want to enable SSL for the Web API Yy|Nn (default=N):
>
Do you want to enable ipV6 for the Web API Yy|Nn (default=N):
>
Do you want to enable Cross Site Request Forgery Protection for the Web API Yy|Nn (default=N):
>
Do you want to copy the instance to a standby master host Yy|Nn (default=Y):
> n
Done writing lighttpd configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/lighttpd.conf
Done writing web UI configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/gpperfmonui.conf
Done writing web UI clustrs configuration to /usr/local/greenplum-cc-web/./instances/gpmon/conf/clusters.conf
Greenplum Command Center UI configuration is now complete. If
at a later date you want to change certain parameters, you can
either re-run 'gpcmdr --setup' or edit the configuration file
located at /usr/local/greenplum-cc-web/./instances/gpmon/conf/gpperfmonui.conf.
The web UI for this instance is available at http://mdw:28080/
You can now start the web UI for this instance by running: gpcmdr --start gpmon 安装完后启动！
No instances
期间你可能会遇到报错：FATAL: no pg_hba.conf entry for host "::1"
解决办法：
在pg_hba.conf中添加：
host all all ::1/128 trust
感谢你能够认真阅读完这篇文章，希望小编分享的“greenplum监控软件Greenplum-cc-web如何安装”这篇文章对大家有帮助，同时也希望大家多多支持创新互联，关注创新互联-成都网站建设公司行业资讯频道，更多相关知识等着你来学习!
网页标题：greenplum监控软件Greenplum-cc-web如何安装-创新互联
网址分享：http://www.scyingshan.cn/article/idjpg.html
